Can be plugged into bus bar, eliminating need for wiring harness
Batteries can be plugged directly into the PC board
Reduces manufacturing labor costs
All Batteries Share a Common Base Footprint
The "HC" series batteries were designed to give you the option of 4 different capacity ratings capable of fitting into one battery enclosure. A .9-inch door spacer is all that is required for the HC1217W and HC1221W Series batteries to be completely interchangeable. This unique design allows you to offer 4 different models while only paying for one common tooling design. The resulting tooling savings can be in the hundreds of thousands of U.S. dollars.
High Efficiency Pb/Ca Cast Alloy Grid Design
Increased energy/density ratios
The HC1221W, HC1225W and HC1228W were designed for high-rate discharge applications. When compared to standard "GP" Series batteries, the "HC" Series batteries' redesigned grid structures provide energy/density ratio increases up to 20%.
Extended shelf life
Battery can be stored up to 18 months at 20°C
Rechargeable
Provides hundreds to thousands of recharge cycles (cycle is based on temperature and depth of discharge)
Non-spillable
Useable in any position
Immobilized Electrolyte
Maintenance free
Reduced internal resistance for superior performance
Transportation
Unrestricted transport. Complies with IATA/ICAO Special Provision A67 for air transport. U.S. DOT: Battery wet, non-spillable, not subject to regulations. IMO: Not classified as of 1992.
EUROBAT Classification: Standard Commercial
Full Particle Tank Formation
Delivers 100% capacity 1st cycle
Uniform plate formation for consistent capacities
100% 2-Cycle Testing
Unmatched reliability
CSB manufactured batteries offer UL-recognized components under UL 924 CSB file number MH 14533. ISO 9001 Certified.
